|
|
 |
|
   
|
||||||
|
|
01-30-2002 Resides in California Salary: US $ N/A
Relocate: YES
On
the Market:
Inquire
Summary
Distinctive
experience in operations engineering of electro-mechanical equipment with explicit
strengths in the areas of:
§
15+ years Engineering Leadership §
Program/Business Oriented §
Cost Reduction Planning
§
Manufacturing Process Optimization §
Start-Up/Complete Assembly §
ME and Quality Assurance §
Management-Engineering relations §
Lead multi-national subcontracting projects §
New Product Introduction §
Fixture/Tooling Design § ISO 9001 Professional
Experience
"Confidential"
– Irvine, CA (Formerly "Confidential" Aerospace)
1996 to Present Sr.
Manufacturing Engineer
Lead
and initiate projects related to audio
and video display electro-mechanical products. §
End-to-end engineering ownership of JAL deliverables (start-up assembly
through system integration). §
Participate in program management to implement solutions for major carriers
and OEMs: Boeing, UAL, Northwest, Air France, British Airways, Aeroflot,
etc. §
Designed and established outsourcing (Asia subcontractors) relationships
to the effect of dramatic cost savings and manufacturing allocation. §
Value and productivity optimization through ‘hands-on’ assembly processes
on electrical and mechanical components and quality assurance integration.
§
Initiated manufacturing strategies and assembly method for maximum product
efficiency. §
Coordinated team work to establish management and engineering communications
channels. §
Operations scheduling and facilities improvement. §
MRB and ECB representative. Pioneer
Magnetics, Inc. – CA
1994-1996 Senior
Manufacturing Engineer, PCBA and Electro-mechanical
Lead
engineer within all levels of the electro-mechanical
assembly process - electrical components through electro-mechanical
products. §
Restructured plant layout, workflow processes and material handling
to the effect of improved manufacturing processes and product maturity. §
Designed and implemented cost realization and process improvements for
tooling and fixtures. §
Coordinated the blueprinting and optimization procedures for new product
and prototype development. §
Designed, documented and applied team initiatives for enhanced assembly-management
coordination. §
Member of CCB and MRB Interstate
Electronics Corporation – CA
1992-1994 Senior
Manufacturing Engineer, Electro-mechanical
Senior
Engineer managed production/prototype operations within GPS, Flight
Management, and Receiver Systems for defense and private sector products. §
Project design and management of prototype modules, from blueprint to
post mechanical/electrical design review. §
Conceived and directed engineering Environmental/Hazardous Waste and
Chemical/Solvent on PCBA program. §
Maximized Concurrent Engineering, Work Cell/Balancing processes on Electro-Mechanical
Assemblies. §
Leadership role in cost reduction projects achieving total savings
of over $50 thousand dollars. Prior
Experience
Sr.
Manufacturing Engineer – Project Lead
Through 1992 Agenda
of responsibilities comprised of manufacturing activities on Electro-mechanical products including: §
Design review/approval §
Processes Evaluation §
Product/Program Introduction §
Productivity Improvement §
Cost Reduction §
Instrument testing/selection §
Manufacturing Cost Estimation (RFQ) §
Tooling/Fixture Design and Improvement
Ø
Developed and established complete PCBA
production lines; tasks included $1 Million Capital Fund Justification
and Appropriation Budget Control. Preparation of the start-up through
the completion of the PCBA/Electro-Mechanical and Cable/Harness
Assembly operations, power requirements evaluation, equipment research
and selection, installation as well as successful implementation and fulfillment
of client requirements including MIL-STD and Commercial Specs. Ø
Designed and provisioned the establishment and installation of Environmental
Test Facilities. Budgeted $1 Million Capital Equipment, evaluation,
facilities planning and justification; responsibilities included: development
of testing criterion and the research and selection of testing models
and instruments, interfacing and coordination with parallel internal projects
and client requirements. Ø
Coordinated and established departmental programs to optimize manufacturing
processes on Defense and Commercial Electro-Mechanical products/projects. Ø
Key role in multiple Standard Cost Estimation (RFQ)
programs. Education §
M.S., Mechanical Engineering, Concordia University, Montreal, Canada §
Post Graduate Studies, Mechanical Engineering, University of Missouri §
B.S., Mechanical Engineering, Feng-Chia University, Taiwan *
U.S.
Citizen *
Willing
to travel * References furnished upon request
Fee based candidate recruiting for LESS! VIEW ->
|
|
|
|
