CNC Programmer-Machinist, 04379

Industry: Manufacturing / Industrial

Resides: North Carolina

Salary: Open

Relocate: Yes

On the Market:

RECRUIT

Objective
        CNC Lathe Programmer/Machinist/Teamleader using previous experience
and well developed sense of detail and accuracy.

Qualifications
15 years experience in lathe machining, developing CNC programs,reading and drawing blueprints, performing close tolerance tooling work, fluent in standard and metric system, using measuring devices such as calipers,mics and gauges.

Education
·       4 year CNC Programmer/Machinist degree
        at Siemens AG/KWU Muelheim an der Ruhr/Germany,1987-1991
·       4 year Technical College degree at
                Gewerbliche Technische Unterrichtsanstalten (Technical College)
                der Stadt Muelheim an der Ruhr/Germany, 1987-1991
·       Realschule (German Highschool) Broich,
Muelheim an der Ruhr/Germany, 1987

Work History
June 2002 - present Teamleader in CNC Lathe Department,
Tyco Inc./Kunkle Valve 983 Old US 70, Black Mountain, NC 28711
·       Setup and programming of various CNC Lathes with Yasnac and Fanuc Controls
·       Quality Control, first piece and in process inspections
·       Teamleader for crew of 5 to 7 Operators

May 2002 Unemployed due to layoff

January 2001-April 2002 CNC Lathe Machinist/Programmer, Alpha Tech Inc.

·       Operating, programming and setup of various CNC Lathes with Fanuc, Okuma 5000 OSP and Siemens 810T Controls.

June 2000-December 2000 Relocation to the US/Marriage

May 2000-1996 CNC Vertical Lathe (Boring Mill) Machinist/Programmer,
Siemens AG/KWU Muelheim an der Ruhr/Germany
·       Operating and programming a CNC Vertical Lathe with a Sinumerik 840C Control and a 4500mm (15 ft.) face plate (table) diameter.
·       Develop CNC-Programs as required.
·       Manufacturing Turbine Parts for Power Plants.

1995-1996 CNC Vertical Lathe Machinist/Programmer, Siemens AG/KWU Muelheim an der Ruhr/Germany
·       Operating and programming a CNC Vertical Lathe with a Sinumerik 880T Control and a 4000mm (13 ft.) face plate diameter.

1991-1992/1993-1995 Manual Vertical Lathe Machinist, Siemens AG/KWU Muelheim an der Ruhr/Germany
·       Operating a manual Vertical Lathe with a 3000mm (10 ft.) face plate diameter.

1992 Service in the German Army
       
        1987-1991 Trainee, Machinist, Programmer of manual and CNC Lathes,
        Siemens AG/KWU Muelheim an der Ruhr/Germany
·       Operating manual Lathes manufacturing small Turbine parts.
·       Operating and programming CNC Lathes with Sinumerik 7T and 810T Controls.
Computer Skills
        Windows 95/98, Windows NT, DOS, Excel, Word, Works

INQUIRE HERE

Fee based candidates recruiting for LESS!

Jobwerx makes no representation as to the accuracy of information transmitted herein. 100802