|
 Quality
Assurance Technician/Manager, 04399
Industry:
Manufacturing / Industrial
Resides:
Kentucky
Salary:
Open
Relocate:
Yes
On
the Market: Cutbacks
Objective
Seeking a position within the Quality Assurance/Quality Control Department.
Professional
experience
10/1996 – 5/2002 (Same Company) Cincinnati, Ohio
Quality
Assurance Manager
n Responsible for managing all of the Quality Assurance
functions. These include but were
not limited to, review and final acceptance of all MRB decisions. Review of all C/A and evaluation of their
effectiveness. Perform and monitor
internal audits to maintain compliance to our ISO 9000 & QS 9000 procedures
and instructions. Perform audits
of potential new vendors and monitor the existing vendor’s performance.
Maintained the Approved Vendor Listing.
Provided assistance to our Sales Department with customer requirements
and, as necessary, interfaced with the customers.
Served on the core team for the QS 9000 implementation efforts,
this included all of the PPAP documentation.
Served as a team leader for two of our ISO/QS Teams.
Served as the Quality representative on the Configuration Control
Board. Responsible for the supervision
of up to three Quality Assurance Technicians, and served as a backup to
our Chief Inspector with the supervision of up to twenty inspectors.
6/1983 – 10/1996 (Same Company) Cincinnati, Ohio
Quality Assurance Technical Assistant
n Responsible for the creation and modification of the master
inspection reports. Served as
the librarian for the specification files.
Reviewed all outgoing purchase orders to assure the proper requirements
were specified. Served as the
company interface with the Government and customer source inspectors.
Reviewed the master processing documentations to assign quality
hold points and assure that the contractually specified information was
included. Wrote or help write all of the quality procedures used by the
company. Taught (Company) Geometric
Dimensioning and Tolerancing class.
3/1983 – 6/1983 (Same Company) Cincinnati, Ohio
Draftsman 1
n Assigned to the design team for the US Navy Tanker, TA-O
Gearbox project. Worked with the
Engineering/Drafting staff in the design of the main gear and assembly.
2/1976
– 1/1983 Lunkenheimer Valve Company Cincinnati, Ohio
Layout Draftsman
n Worked in the Engineering Department at Various levels
as a draftsman. Worked closely
with the Engineers to modify/create the standard product line to meet
customer requirements. Contacted
vendors with design information when required.
Worked with the shop to resolve problems and to help interpret
the drawing requirements.
Education
1/1976 Northern Kentucky Vocation/Technical School
Covington, Kentucky
Drafting Certificate
Have obtained CEU’s and have certificates
for the following:
Geometric and Dimensional Tolerancing - ASQ
Basic SPC - ASQ
Short Run SPC - ASQ
Advanced SPC - ASQ
Quality Cost - ASQ
Root Cause and Corrective Action - ASQ
Heat Treatment Principles
– ASM
INQUIRE
HERE
Fee based candidates recruiting for
LESS! 
Jobwerx
makes no representation as to the accuracy of information transmitted
herein. 101402
|
