|
|
|
|
   
|
||||||
|
|
Industry: Plastics, Rubber and Automotive
Resides:
Salary: Open
Relocate: Yes
On
the Market: RECRUIT To
obtain a engineering position, utilizing
technical skills developed through experience and education
with the opportunity
for advancement
in the area of engineering management. EDUCATION THE UNIVERSITY
OF TENNESSEE AT MARTIN, Martin, Tennessee Bachelor of Science Degree Electrical Engineering, May 1992 WORK EXPERIENCE
(Confidential- Auto mfg)
Tennessee Electrical Engineer / Project Manager (Automobile
Manufacturer) Project
manager and lead facilities electrical engineer responsible for the electrical distribution system and plant expansions
for TN and MS facilities. Responsible for GOODYEAR TIRE & RUBBER COMPANY
(April
2000 - Dec 2001) Union City, Tennessee Electrical Engineer (Tire & Rubber
Manufacturer) Lead
electrical engineer responsible for the installation and start-up of
a twenty million dollar
automated tire building expansion. Responsible
for directing engineering and the maintenance staff in support
of the new
installations, design, troubleshooting,
analysis, and operator
/ maintenance training. Hired
and managed all
contractors involved
with the construction,
installation and start-up. Performed specification, distribution layout and
installation of the ALUMINUM
COMPANY OF AMERICA (Nov.1995
- April 2000) Nashville, Tennessee Plant / Project Engineer (Plastics, Wire
& Cable Maufacturer)
Responsible
for all capital projects from concept to approval through installation
and startup for three Nashville facilities.
Managed three maintenance departments for plant maintenance and
projects. Maintained plant environmental
permits for EPA,
emissions, etc. and
records. Developed division wide project, environmental,
health and safety programs. Capital
projects included: Installation
and startup of two plant compound conveyance systems,
Installation Visual Basic operator interfaces. Installation of automated high speed German
packaging equipment and plastic injection mold machines. "Engineering Excellance Award" '98 &
‘00. ALUMINUM COMPANY
OF AMERICA (cont.) Nashville, Tennessee Plastics Extrusion Maintenance Engineer
Responsible
for maintenance for two facilities, including fifteen extrusion lines. Managed
all maintenance activities,
purchased all maintenance materials,
maintained budgets, hired and
managed all contractors on site, and
performed troubleshooting as required. Implemented a maintenance management system including:
spare parts inventory, predictive maintenance methods and preventative
maintenance timetables. Installation and troubleshooting of AC / DC motor
and drive systems, color feeders, high speed packaging, PLC controls,
conveyors, HVAC, air
compressors, pumps, boilers and chiller systems. Development and implementation
of safety programs: LO/TO, Electrical
Safety, Fall Protection, Confined Spaces, and Mobile Equipment. DANA CORPORATION (Jul.1992 - Nov. 1995) Boston WeatherHead
Division Hohenwald, Tennessee Quality/Process Engineer (Rubber & Plastic Hoses)
Responsible for
process improvements, process controls, departmental
capital budget and expenditures. Duties included: Troubleshooting production line failures, designed
and installed laser control systems on extrusion lines, designed
and installed
plant wide data acquisition
system utilizing Wonderware, installation of control
systems for calendaring operations, and assisted
the installation of a new autoclave curing line.
COLONIAL RUBBER
WORKS, INC. /
(Jan. 1991 - Jan. 1992) DHCOMPOUNDING COMPANY
Dyersburg, Tennessee University Cooperative Education Program (Plastics
Extrustion and Compounding) Coordinated
the implementation of the parts room set-up and training. Installed
maintenance management system
and initiated
preventative maintenance procedures. Assisted the electronic technician,
testing and troubleshooting for production line start-up. Test areas included: Wired and performed startup on Ktron Feeder
units, Allen Bradley PLC-5/SLC-500,
U.S.
DATA'S FactoryLink supervisory control
and data acquisition system,
AC / DC motors, pressure transducers and
PID temperature controllers, pneumatic
equipment, level sensors, Extrustion
and plastic injection mold equipment and control panel wiring. STRENGTHS Familiar
with Engineering Software: Microsoft (Word, Excel, Access, Project), AutoCAD;
Visual Basic; Allen Bradley & Reliance Software;
Wonderware, U.S. Data, and Intellution
data aquisition software. Team member, self-starter,
goal oriented and dedicated. EXTRACURRICULAR ACTIVITIES Dean's List (University of Tennessee
at Martin) Institute of Electrical and Electronic
Engineers (1989 - Present) Society of Manufacturing Engineers
(1989 - Present) Alpha Tau Omega Fraternity (1988 - Present) Cooperative Education Program (1990 - 1992)
|
|
|
|
