|
 Facilities
Manager
04499
Industry:
Manufacturing, Automotive, Stamping, Plastics. Injection Molding
Resides:
Florida
Salary:
Open
Relocate:
Yes
On
the Market:
Objective:
It is my goal to establish myself as a productive
team member
Within the organization in which I am employed.
By creating an environment
That is conducive to team self-expression,
creativity.
Experience:
(Company) FL 7/2000 - Present
Facilities Manager
- Responsible for all maintenance and facilities
of a 200,000 sq. ft. plant
- Setup of a new injection molding plant
- The purchase of three new 1000 ton Van
Dorn presses
- Managing a budget for the maintenance
department
- Managing 6 maintenance technicians
- Manage both maintenance and engineering
departments
- Responsible for maintenance on (10) 1000
ton Van Dorn presses
- Responsible for maintenance on all injection-molding
:
- Con air vacuum loading system for 8 presses
- Con air water heaters
- And all the buying for the maintenance
department and the handling of all vendors
Delphi Dayton, OH 3/1999 - 4/2000
Project Manager/ Contract Position
- Moved a injection molding plant from MI
to OH:
- (5) 3000 ton Van Dorn
- (5) 1500 ton Cincinnati
- (5) HPM these presses ranged from 500
to 2500 tons
- Setting up 15 injection-molding presses
- This job came in under budget and 6 months
early
- Had a team of 70 contractors and 10 maintenance
technicians
- Buying and set up of all secondary equipment:
- A new Con Air vacuum loading system for
(18) presses
- A new200, 000 ton Con Air chiller system
- Cleaned and painted (5) old silo
Cambridge Industries Dearborn, MI 3/1996
- 3/1999
Facilities Manager
- Responsible for all maintenance and facility
operations in a four-plant (122) press injection molding operation
- Consolidating into a two-plant facility
with considerable restructuring of plant layouts.
- These presses ranged (75 ton to 2500 ton)Van
Dorn, Cincinnati, HPM, and Engel
- Established a preventative maintenance
program in both plants
- Reduced down times 25%,
- Implement and maintaining a QS-9000 system
for the maintenance department two times
- Maintain a budget for the maintenance
department
- Responsible (25) maintenance technicians
over a 3-shift operation
- Responsible all buying for the every day
operation of the maintenance department
- Buying and set up a new Con Air chiller
system, this was a 100,000-ton system
- The financing and setting up of (3) 1000-ton
Engel presses and the handling of vendors
UTA AUTOMOTIVE ALMA MI. 3/1995- 2/1996
Floor Supervisor
- Assign work load to comply with production
schedules
- Maintain good housekeeping and safety
practices
- Support the plant eh&s program the
5-s
- Input the daily production numbers into
the production book
I
Patton Electric Ft. Wayne, IN 2/1993 - 3/1995
Facilities Manager
- Responsible for all maintenance operations
of a (20) press injection molding and a (30) press stamping and assembly
plant. Setup of a new 170,000 sq. plant in Peru, Indiana
- The financing and setting up of 8 new
HPM injection presses ranging from (125 ton to 500 ton)
- In charge of running two maintenance departments
of (20) maintenance technicians over a 3 shift operation and the handling
of vendors
- Established a preventative maintenance
program
- Reduced down times 25%,
- In charge of running two maintenance departments
of (15) maintenance technicians over a 3 shift operation and the handling
of vendors
1977 to 1993 attending school and working
as a maintenance technician in an injection molding and stamping facilities.
Education:
Indiana University Ft. Wayne, IN 1971
Bachelor's Degree Physical Education
Minor: U.S. History
Indiana Vocational Technical School Ft. Wayne,
IN 1975
Associates Degree Maintenance Technology
and Supervision
- HPM SCHOOL 1978
- ENGLE SCHOOL 1998
- CINCINNATI SCHOOL 1988
U.S. Military - ADJ school 1969
U.S. Navy - Honorable discharge
INQUIRE
HERE
Fee based candidates recruiting for
LESS! 
Jobwerx
makes no representation as to the accuracy of information transmitted
herein. 112602
|
