 |
Process
Engineer
16108
Resides in North Carolina
. Objective
To work for an employee and customer-oriented company dedicated to quality
and continuous improvement.
. Experience
(Company: Leading global manufacturer of industrial belting, power transmission
and motion control components) NC
Process Engineer
2003 - Present
Developed processes for assembly, injection molds and various materials;
oversaw daily troubleshooting of manufacturing problems; set up preventive
maintenance system; worked with design of experiments (DOE/statistical
analysis) to optimize process parameters/controls; developed the universal
condition sheet; Implemented 5s, Kaizen, and other Lean manufacturing
techniques; developed and audited departmental procedures and work instructions
to aid in ISO9000.
Nacom Corporation, Griffin, GA: Automotive Tier I (QS9000)
Sr. Process Engineer
2000 - 2003
Supervised the development of new processes for new mold tools and various
materials; oversaw daily troubleshooting of process problems; set up preventive
maintenance system; worked with design of experiments (DOE/statistical
analysis) to optimize process parameters/controls; developed the universal
condition sheet; developed and audited departmental procedures and work
instructions to aid in QS9000; audited ISO14001.
Technical Section Chief 1999
- 2000
Project management: coordinate all activities and projects with molding
engineering and setup personal; establish training program for all positions
in the molding dept; led continuous improvement team ie. kaizens and corrective
actions; implementation of activities to improve O.E.E.
Process Engineer
1996 - 1998
Developed and engineered new processes for new mold tools and various
materials; assisted in daily troubleshooting of process problems; set
up departmental training program for all associates and assisted in the
training of all technical personnel; worked with design of experiments
(DOE/statistical analysis) to optimize process parameters/controls; developed
departmental procedures/work instructions to aid in QS9000; led teams
to develop internal and customer 8D's; assessed vendor capacity and assisted
in vendor process improvements; initiated program for setup time reduction
as well as overall cycle time reduction; performed engineering trials
on new products.
Stihl Incorporation, Virginia Beach, VA
Supervisor
1993 - 1996
Oversaw the complete operation of 22 injection molding machines, 2 extrusion
machines, 2 technicians and 13 operators; responsible for maintaining
quality at all phases of production; set up training system for all personnel.
Process Technician
1990 - 1993
Set up all phases of production; trained all technical personnel; monitored
quality, up-time, and scrap; tested new molds and engineered accompanying
processes.
Set Up Technician
1988 - 1990
Set up molds; trained operators; monitored quality, up time, and scrap.
General Foams Plastic, Norfolk, VA
Technical Trainer
1990 - 1991
Setup training program for technical personnel; generated technical training
manual.
Supervisor
1989 - 1990
Oversaw complete operation of 25 injection molding machines, 7 blow molding
machines, 3 area supervisors, 3 set-up techs and 25 operators.
. Other
Machines: (10-750 Ton) Arbug, Engel, Negri
Bossi, STM, Toshiba, Nissei, Impco,
Van Dorn.
Materials: ABS, Nylon, PC, PPO, PP, PVC, PS,
Acetal, elastomers
Training: Currently attending Mount Olive
College.
Paulson Injection Molding,
Shotscope Production Monitoring, RJG Injection Molding, Watlow/DME Hot
Runner Technology, SPC, QS9000, 8D (Root cause analysis), TQM, ISO14001,
INQUIRE
HERE Remember Candidate # 16108
Fee
based candidates recruiting for
LESS!
Jobwerx
makes no representation as to the accuracy of information transmitted
herein. 083004
|
|
|
