Arburg at Plastpol plastics industry trade fair

Arburg at Plastpol, the Polish plastics industry trade fair in Kielce, with two Allrounder Golden Edition machines and a vertical Allrounder V.

At this year’s Plastpol, which will take place in Kielce in Poland from 27 to 30 May, Arburg will demonstrate three plastics processing machinery exhibits on its representative stand. On Stand B 30 in Hall B, two Allrounder Golden Edition machines and a vertical Allrounder V will produce technical parts, thereby demonstrating the extraordinary versatility of this cost-effective machine series. Indeed, these exhibits perfectly address the requirements of the Polish plastics industry market.

Branch manager Slawomir Sniady regards this event as a very significant trade fair for the plastics industry in Poland: The Plastpol is a relatively new trade fair, but due to its special focus, in recent years it has evolved to become the most important showcase for the Polish plastics industry. We are therefore fully committed to being present at this important event.”

Allrounder Golden Edition with two interesting applications
Two of the total of three exhibits are Allrounder Golden Edition machines. On the one hand, an Allrounder 320 C Golden Edition with a clamping force of 500 kN and a size 170 injection unit will produce a terminal strip, while an Allrounder 570 C Golden Edition with a clamping force of 2,000 kN and size 800 injection unit will produce a torch lens. These two technical parts demonstrate the wide range of plastics processing applications of this cost-effective machine series.

The hydraulic Allrounder Golden Edition machines combine state-of-the-art machine technology with an attractive price/performance ratio. The plastics injection machine series now consists of a carefully thought-out range of nine Allrounders for various applications, each machine being equipped with fixed clamping force/injection unit combinations. The horizontal Allrounder 270 C, 320 C, 420 C, 470 C, 570 C, 720 S and 920 S Golden Edition machines cover a clamping force range from 400 to 4,600 kN, with a maximum shot weight of 1,286 g PS. The two Allrounder 1200 T 800 Golden Edition and Allrounder 1200 T 1000 Golden Edition vertical rotary table machines feature a table diameter of 1200 millimetres and clamping forces of 800 and 1,000 kN.

Slawomir Sniady has the following to say about this clear focus: “Since their introduction in 2006, the Allrounder Golden Edition machines have enjoyed sustained, major interest on the part of Polish customers. Sophisticated technology, diverse equipment and an attractive price are all advantages that precisely fulfil the requirements of the Polish plastics injection moulding market and have enabled the Golden Edition to become the most sold Arburg machine series in Poland. That is why this year, we will also be using interesting applications to show our customers the wide area of applications for these machines.”

Allrounder V: The specialist for the encapsulation of inserts
Complementing the Golden Edition exhibits at the Plastpol will be a vertical Allrounder 175 V with a clamping force of 125 kN and size 70 injection unit. This vertical plastics machine, which is distinguished by its free-space system, will be producing a contact insert. This product impressively demonstrates these machines’ special field: the encapsulation of inserts. They are of particular interest to the Polish electronics and automotive industries. The encapsulation of inserts is a dynamic market in Poland and one in which Arburg has already played a successful part with its U-position Allrounder 221 K.

The modern alternative, the Allrounder V with fixed vertical mould clamp, is now available in three different sizes. The hydraulic machines are characterised by their fixed vertical, down-stroking clamping units, designed as a free-space system. The machine range currently comprises the Allrounder 175 V with a clamping force of 125 kN and size 30 or 70 injection units, the Allrounder 275 V with a clamping force of 250 kN and size 70 or 100 injection units and the Allrounder 375 V with a clamping force of 500 kN and size 100, 170 and 290 plastics injection units.

If you're an employer looking to fill a job opening, click here to find out about posting your job listing through Jobwerx.com.

Read a recent article about -
. LANXESS at Plastics Design and Moulding 2008
The Semi-Crystalline Products business unit of specialty chemicals group LANXESS will once again be represented at the Plastics Design and Moulding trade fair.

Find out how to protect your network from hackers, malware, and other malicious attacks with No.1 Ad-Aware Plus!

Read the Top Headlines.

We will be happy to receive feedback and ideas for new articles! Click Here