Spyware
programs can steal your personal identity. Are you
protected? Find out!
|
|
|
|
   
|
||||||
|
|
September 2, 2005 Tooling Cost Savings for Every Manufacturing Process Seattle, WA, USA--(Jobwerx News)--These toolholding solutions use a unique
and powerful way to hold the shank of a cutting tool extending tooling
life.
SCHUNK TENDO Hydraulic Toolholders use a unique and powerful tool-shank
holding system offering precise clamping and superior run-out.
Cutting tools with different shanks are held with great concentricity.
The enormous clamping pressure displaces oil or grease into the TENDO
groove in the clamping bore. Clamping areas remain dry thus high torque
transmission is guaranteed at all spindle speeds. The hydraulic system
also absorbs vibrations inherent in the cutting or grinding processes.
The results are very high T.I.R. accuracy and repeatability less then
3 microns (0.00012"); tool life extended up to four times; greatly improved
surface quality of machined parts.
TENDO Hydraulic Toolholders offer precise toolholding solutions for almost
every manufacturing process. The toolholders are available for high-speed
and fine milling; heavy-duty milling; wood machining; HSC (high speed
machining); internal grinding; boring and chamfering; precision reaming;
precision tool grinding. With TENDO slotted, coolant-proof intermediate
sleeves, different shank diameters can be handled with the same toolholder
for additional application versatility and tooling cost savings. All TENDO
Hydraulic Toolholders are completely closed systems that operate free
of dirt, coolants, lubricants, and chips to assure low maintenance and
high operating lifetime.
E-mail this page to a friend
|
|
Copyright - Unless otherwise stated all contents of this web site are © 1998/2005– JOBWERX.COM. – All Rights Reserved. For permission to reproduce any contents of this web site, please advise our Syndication department: Log onto HELP Create on-line tests, quizzes,
assessments and exams in minutes! |
|
