Get
powerful protection from harmful adware and spyware that can lead to identity
theft!
|
|
|
|
   
|
||||||
|
|
2006-04-24 News Headlines
Polyamide 46 plastics resin helps direct automotive joystick Gears made of ultra-precise Stanyl PA46 resin from DSM Engineering Plastics helps keep inner workings of joystick automotive aid pointed in the right direction.
Precision gears made of Stanyl*, a high-performance polyamide 46 (PA46)
resin from DSM Engineering Plastics, help a new joystick-based drive-by-wire
system translate a driver’s steering movements into vehicle control.
Called Joysteer®, the new system was designed to enable drivers with
arm muscle disabilities get behind the wheel – or in this case,
joystick – and drive by themselves. Joysteer will be demonstrated
at Hannover Messe 2006 Developed at the highly-regarded Bern University for Applied Sciences HTI-Biel, Joysteer, augments a car’s conventional steering wheel with a pair of joysticks mounted on either side of the wheel. These are electronically coupled to the vehicle’s steering mechanism. At Hannover Messe, Joysteer will be demonstrated in a Volkswagen T5 Multivan, donated by the automaker, at Stand A28, hall 2.
Inside this joystick housing for Joysteer®, an aid that will allow those with muscular disabilities to steer an automobile by joystick, a gear made of Stanyl* polyamide 4,6 (PA46) allows accurate encoding of how much the driver turns the joystick handle (which, while not shown here, will mount inside the silver cylindrical assembly in the center). This is then transmitted to extra-strong gears made of Stanyl that turn the car’s steering shaft - and thus the car itself. Gears made of Stanyl in Joysteer® depend on the high strength, low friction, and dimensional stability of the material to help ensure safe driving.
Developed in close cooperation with the school’s design team and
with the fabricator of the gears, Mikron Plastics Technologies, the Stanyl
gears play important roles both at the joystick and at the vehicle’s
steering shaft. The application runs the gamut of performance from delicate
to tough, with both applications depending on Stanyl’s dimensional
stability, low friction, and ability to absorb vibration and noise. Said Hans Wennekes, Business Development Manager, Stanyl, “The gear sets in both the joysticks and the motor drives are zero backlash. That’s the only way the joystick can deliver absolute precision for encoding, and it enables the tightest possible steering control, without wander. Technical collaboration between DSM, Mikron and HTI Biel – or, if you will, the material maker, the gear cutter and the design team – was the only way such a precise mechanism could have been developed.”
The joystick gears must precisely translate small movements to programmable encoder circuitry. The movement required is small, and the touch must remain light. The steering shaft gears, on the other hand, must apply strong forces to the vehicle’s steering system, calling on Stanyl’s resistance to fatigue and mechanical stiffness and strength. A critical innovation in the design is feedback to the driver. Small motors in the joystick mechanism provide variable resistance that is sent back to the driver through the Stanyl joystick gears. This resistance signals the severity of the turn and also transmits the road feel of bumps and surfaces to the driver. This enables the system to give drivers the same kinds of tactile information a driver would sense while using a conventional steering wheel. The degree of feedback can be programmed for a given driver’s muscle capabilities. At HTI Biel, a team of employees and faculty, backed by a close-knit
group of industry sponsors and participants, has worked over the last
four years to perfect Joysteer. The technology won the Swiss Technology
Award 2006. Key development members have founded a new, spin-off company,
also called Joysteer. A broad range of sponsors and advisors, including
automotive manufacturers as well as associations and foundations for the
disabled, have provided important support from the start. * Stanyl is a registered trademark of DSM Engineering Plastics.
Click here to view more news headlines. E-mail this page to a friend
|
|
Changing
Jobs? View Homes for Sale in the U.S. 
News / Resources - Plastics for cables with longer lifetime - Certification, Training and Courses from The American Management Association
- Specials this month at Online Metals - Looking for a Study Program? - All this Months News - How Well Do You Know Yourself? Select from 22 different tests and find out! Copyright
- Unless otherwise
stated all contents of this web site are © 1998/2006 JOBWERX.COM.
– All Rights Reserved. For permission to reproduce any contents of this
web site, please advise our Syndication department: Log onto HELP
|
|
