The new generation of cyber crime is shrewd. Are you protected?

2006-12-01 News Release

Web www.jobwerx.com jobwerx.tradepub.com

Search Jobwerx The Engineering Web

New tooling tandem clamping vises

The new tooling line of concentric clamping vises can be applied to rotary tables, tombstones or can be mounted directly onto the machine table.

A new line of concentric clamping vises, the PZS pneumatic clamping vise and the HZS hydraulic clamping vise has been intriduced by Schunk. Both units stand out from the crowd with outstanding clamping forces and long jaw strokes.

Find Information and Suppliers of hydraulic clamping vises.

Due to the mono-block design of the unit, there is no interface between the cover and the base body of the vise. This results in higher accuracy and stiffness of the unit. In order to achieve consistent clamping results, a special mechanical seal avoids chip contamination of the jaw guides. A central lubrication system is available to protect the base jaws and the wedge hook system against wear by covering the components with a lubricating film. As a standard, the vises can be lubricated via easily accessable grease fittings. Due to the double air connections at the bottom side, the PZS clamping vise can simply be turned 90° to change the clamping orientation.

New TANDEM PZS And HZS Concentric Clamping Vises Combine High Clamping Forces With Long Jaw Strokes. Click Go for High resolution image. photo: Schunk

Both versions of this vise have a square shape and are available in sizes 110, 170 and 250 mm. The pneumatic version, PZS-D, is also available with a double-acting cylinder. The resulting piston area and the clamping force of the D-version are doubled. To actuate the pneumatic version of these clamping vises, compressed air between 6 and 9 bar is required. The hydraulic version HZS can operate at a maximum hydraulic pressure of 120 bar. The low profile housings of these concentric vises are designed for low space requirements and are made of a forged wear resistant material to withstand extremely high forces.

SCHUNK offers an extensive variety of top jaws for these concentric vises. The units can be assembled on a standard SCHUNK base plate that can be equipped with a pressure maintenance valve. This allows the clamped workpiece and vise to be moved without input pneumatic pressure hoses. These vises can be applied to rotary tables, tombstones or can be mounted directly onto the machine table. Combined with the UNILOCK Quick Change Pallet System, SCHUNK offers additional potential to reduce set-up times.

Find information about SCHUNK Inc.

Read a recent press release about - New Schunk toolholders are suitable for cutting speeds up to 50,000 rpm while offering superior run out accuracy of less than 3 microns.

Tooling Engineer Jobs - Post Employment Opportunity!

E-mail this page to a friend

- Polyurethanes casing for tool presetters

- Certification, Training and Courses from The American Management Association

- Looking for a Study Program?

- All this Months News

- Changing Jobs? View
Homes for Sale Nationwide

 

- Golf Equipment Manufacturer -Buy direct and Save!

- Maybe it's time to check your Home Owners Insurance

Copyright - Unless otherwise stated all contents of this web site are © 1998/2006 JOBWERX.COM. – All Rights Reserved. For permission to reproduce any contents of this web site, please advise our Syndication department: Log onto HELP